Overview
When adding a new source in Iris, selecting the appropriate brand and model is critical for enabling firmware-based control features. This guide explains how the selection process works, what to expect from each driver status, and what to do if your device isn’t listed.
Step-by-Step Guide
1. Add a New Source
In the Iris UI, go to the Sources tray on the left of your screen.
Click Add a New Source [+]
Select a device to begin setup.
2. Set Video Settings
Configure resolution, frame rate, and other video parameters.
3. Select Camera Brand and Model
In the Controls section, choose your Camera Brand.
Then select the corresponding Camera Model.
4. If Your Brand or Model Is Missing
Choose Other as your brand/model.
Follow prompts to complete Camera Calibration.
4. Wait for Iris to Connect
After clicking Continue in the Video Source tab, allow 15–30 seconds for Iris to sync with the camera.
5. Test Control Features
Try features like Joystick, CineFrame, Zoom, or Focus to validate functionality.
How It Works and What to Expect
Each camera brand/model has unique command protocols for control functions like pan, tilt, zoom, and pedestal.
Iris references internal camera drivers that vary in status: Beta and Stable.
After proper setup, supported functions will become available within the UI.
Calibration for Generic models ensures basic functionality is still accessible.
Tips, Limitations, and Best Practices
Always wait 10–15 seconds after selecting your model before testing controls.
Choosing the correct model ensures maximum compatibility and feature access.
If unsure about your model’s support status, refer to the Camera Drivers article.
FAQs
Why is selecting a brand and model required?
To map correct firmware commands for control functions.
What if my camera isn't listed?
Choose Other/Generic and perform a calibration. Be sure to message [email protected] with your Brand & Model for us to add to the next batch of added drivers!
What does driver status mean?
Alpha/Beta: experimental. Stable: production ready. Unstable: out of experimental but may encounter occasional bugs.
How long does linking take after selection?
Typically 10 seconds.
Can I use Iris without selecting a model?
No, controls require a model. If you’re unsure or if the correct selection isn’t available, select Other.
What devices are supported?
Cameras, NVRs, encoders, USB capture cards, and much more.
What happens during calibration?
Iris learns available functions one by one and maps those functions to the UI for ease of use.
Use Cases
Integrating a PTZ camera with full motion control.
Setting up a camera with limited documentation.
Testing experimental camera models via Alpha drivers.
Using a generic encoder with manual function discovery.
Diagnosing control issues by switching to Generic + Calibration.
Selecting your device’s brand and model ensures optimal control integration in Iris. If your device isn’t recognized, the calibration path still enables usable functionality.